|
Product Details:
|
OD D1(mm): | 1000 | Height: | 1350 |
---|---|---|---|
Tool Box Size: | Optional | Flight Thickness (kg): | 500/600 |
Flight Thickness (mm): | 30 | Central Shaft OD (mm): | ¢219*25 |
Teeth Quantity (excludes Pilot): | 12 | Weight: | 1187 |
High Light: | 30mm Flight Rock Auger Bit,Height 1350mm Rock Auger Bit,Height 1350mm pneumatic rock drill bits |
Digging Different Holes Diameters Earth Augers, Rock Auger Ground Drilling Machines, Drilling Auger
Introduction:
Drilling Bucket:Double bottom double cut soil bucket &rock bucket
Specification:φ600-φ2500mm
According to different geological conditions of construction, different drill teeth need to be selected for construction. The
Roller bucket is suitable for super hard base rock formation, the loss is small; the Drilling bucket with bullet is suitable for
the middle weathered rock layer and the bedrock layer with high working efficiency.
Product parameters
Double-cut, single flight, straight rock auger with pilot | ||||||||
OD | Height | Tool box size | Flight pitch | Flight thickness | Flight thickness | Teeth quantity (excludes pilot) | Central shaft OD | Weight |
D1(mm) | H2 (mm) | P1/P2 (mm) | δ1(mm) | δ2(mm) | pc | D2 (mm) | Kg | |
500 | 400/550 | 30 | 30 | 4 | ¢180*25 | 640 | ||
600 | 1350 | Optional | 400/550 | 30 | 30 | 4 | ¢180*25 | 717 |
700 | 500/600 | 30 | 30 | 6 | ¢219*25 | 843 | ||
800 | 500/600 | 30 | 30 | 8 | ¢219*25 | 946 | ||
900 | 500/600 | 30 | 30 | 10 | ¢219*25 | 1077 | ||
1000 | 500/600 | 30 | 30 | 12 | ¢219*25 | 1187 | ||
1100 | 500/600 | 30 | 30 | 12 | ¢219*25 | 1315 | ||
1200 | 600/700 | 30 | 30 | 14 | ¢219*25 | 1370 | ||
1300 | 600/700 | 30 | 30 | 16 | ¢219*25 | 1505 | ||
1400 | 600/700 | 30 | 30 | 18 | ¢219*25 | 1660 | ||
1500 | 700/900 | 30 | 30 | 18 | ¢219*25 | 1659 | ||
1600 | 700/900 | 30 | 30 | 20 | ¢219*25 | 1810 | ||
1700 | 700/900 | 30 | 30 | 22 | ¢219*25 | 1979 | ||
1800 | 900 | 30 | 30 | 24 | ¢219*25 | 2020 | ||
1900 | 900 | 30 | 30 | 26 | ¢219*25 | 2188 | ||
2000 | 900 | 30 | 30 | 26 | ¢219*25 | 2351 | ||
2100 | 900 | 30 | 30 | 28 | ¢219*25 | 2524 | ||
2200 | 900 | 30 | 30 | 30 | ¢219*25 | 2700 | ||
2300 | 900 | 30 | 30 | 32 | ¢219*25 | 2900 | ||
2400 | 900 | 30 | 30 | 34 | ¢219*25 | 3100 | ||
2500 | 900 | 30 | 30 | 34 | ¢219*25 | 3282 |
Double-cut, single flight clay auger | |||||||
OD | Height | Tool box size | Flight pitch | Flight thickness | Flight thickness | Central shaft OD | Weight |
D1(mm) | H2 (mm) | P1/P2 (mm) | δ1(mm) | δ2(mm) | D2 (mm) | Kg | |
500 | 400/550 | 30 | 30 | ¢180*25 | 643 | ||
600 | 1350 | Optional | 400/550 | 30 | 30 | ¢180*25 | 728 |
700 | 500/600 | 30 | 30 | ¢219*25 | 850 | ||
800 | 500/600 | 30 | 30 | ¢219*25 | 942 | ||
900 | 500/600 | 30 | 30 | ¢219*25 | 1053 | ||
1000 | 500/600 | 30 | 30 | ¢219*25 | 1163 | ||
1100 | 500/600 | 30 | 30 | ¢219*25 | 1300 | ||
1200 | 600/700 | 30 | 30 | ¢219*25 | 1356 | ||
1300 | 600/700 | 30 | 30 | ¢219*25 | 1500 | ||
1400 | 600/700 | 30 | 30 | ¢219*25 | 1662 | ||
1500 | 700/900 | 30 | 30 | ¢219*25 | 1665 | ||
1600 | 700/900 | 30 | 30 | ¢219*25 | 1812 | ||
1700 | 700/900 | 30 | 30 | ¢219*25 | 1963 | ||
1800 | 900 | 30 | 30 | ¢219*25 | 2000 | ||
1900 | 900 | 30 | 30 | ¢219*25 | 2171 | ||
2000 | 900 | 30 | 30 | ¢219*25 | 2346 | ||
2100 | 900 | 30 | 30 | ¢219*25 | 2523 | ||
2200 | 900 | 30 | 30 | ¢219*25 | 2700 | ||
2300 | 900 | 30 | 30 | ¢219*25 | 2889 | ||
2400 | 900 | 30 | 30 | ¢219*25 | 3100 | ||
2500 | 900 | 30 | 30 | ¢219*25 | 3287 |
Double-cut, single flight, straight rock auger with pilot | ||||||||
OD | Height | Tool box size | Flight pitch | Flight thickness | Flight thickness | Teeth quantity (excludes pilot) | Central shaft OD | Weight |
D1(mm) | H2 (mm) | P1/P2 (mm) | δ1(mm) | δ2(mm) | pc | D2 (mm) | Kg | |
500 | 400/550 | 30 | 30 | 4 | ¢180*25 | 640 | ||
600 | 1350 | 400/550 | 30 | 30 | 4 | ¢180*25 | 717 | |
700 | 500/600 | 30 | 30 | 6 | ¢219*25 | 843 | ||
800 | 500/600 | 30 | 30 | 8 | ¢219*25 | 946 | ||
900 | 500/600 | 30 | 30 | 10 | ¢219*25 | 1077 | ||
1000 | 500/600 | 30 | 30 | 12 | ¢219*25 | 1187 | ||
1100 | 500/600 | 30 | 30 | 12 | ¢219*25 | 1315 | ||
1200 | 600/700 | 30 | 30 | 14 | ¢219*25 | 1370 | ||
1300 | 600/700 | 30 | 30 | 16 | ¢219*25 | 1505 | ||
1400 | 600/700 | 30 | 30 | 18 | ¢219*25 | 1660 | ||
1500 | 700/900 | 30 | 30 | 18 | ¢219*25 | 1659 | ||
1600 | 700/900 | 30 | 30 | 20 | ¢219*25 | 1810 | ||
1700 | 700/900 | 30 | 30 | 22 | ¢219*25 | 1979 | ||
1800 | 900 | 30 | 30 | 24 | ¢219*25 | 2020 | ||
1900 | 900 | 30 | 30 | 26 | ¢219*25 | 2188 | ||
2000 | 900 | 30 | 30 | 26 | ¢219*25 | 2351 | ||
2100 | 900 | 30 | 30 | 28 | ¢219*25 | 2524 | ||
2200 | 900 | 30 | 30 | 30 | ¢219*25 | 2700 | ||
2300 | 900 | 30 | 30 | 32 | ¢219*25 | 2900 | ||
2400 | 900 | 30 | 30 | 34 | ¢219*25 | 3100 | ||
2500 | 900 | 30 | 30 | 34 | ¢219*25 | 3282 |
Single-cut, single flight, straight rock auger | ||||||||
OD | Height | Tool box size | Flight pitch | Flight thickness | Flight thickness | Teeth quantity (excludes pilot) | Central shaft OD | Weight |
D1(mm) | H2 (mm) | P1/P2 (mm) | δ1(mm) | δ2(mm) | pc | D2 (mm) | Kg | |
500 | 500 | 30 | 30 | 2 | ¢180*25 | 588 | ||
600 | 1250 | Optional | 500 | 30 | 30 | 2 | ¢180*25 | 650 |
700 | 500 | 30 | 30 | 3 | ¢219*25 | 742 | ||
800 | 500 | 30 | 30 | 4 | ¢219*25 | 825 | ||
900 | 500 | 30 | 30 | 5 | ¢219*25 | 944 | ||
1000 | 500 | 30 | 30 | 6 | ¢219*25 | 1034 | ||
1100 | 500 | 30 | 30 | 6 | ¢219*25 | 1159 | ||
1200 | 700 | 30 | 30 | 7 | ¢219*25 | 1110 | ||
1300 | 700 | 30 | 30 | 8 | ¢219*25 | 1210 | ||
1400 | 700 | 30 | 30 | 9 | ¢219*25 | 1310 | ||
1500 | 700 | 30 | 30 | 9 | ¢219*25 | 1420 | ||
1600 | 700 | 30 | 30 | 10 | ¢219*25 | 1538 | ||
1700 | 700 | 30 | 30 | 11 | ¢219*25 | 1667 | ||
1800 | 900 | 30 | 30 | 12 | ¢219*25 | 1575 | ||
1900 | 900 | 30 | 30 | 13 | ¢219*25 | 1685 | ||
2000 | 900 | 30 | 30 | 13 | ¢219*25 | 1800 | ||
2100 | 900 | 30 | 30 | 14 | ¢219*25 | 1920 | ||
2200 | 900 | 30 | 30 | 15 | ¢219*25 | 2050 | ||
2300 | 900 | 30 | 30 | 16 | ¢219*25 | 2176 | ||
2400 | 900 | 30 | 30 | 17 | ¢219*25 | 2300 | ||
2500 | 900 | 30 | 30 | 17 | ¢219*25 | 2459 |
Double-cut, single flight, progressive rock auger | ||||||||
OD | Height | Tool box size | Flight pitch | Flight thickness | Flight thickness | Teeth quantity (excludes pilot) | Central shaft OD | Weight |
D1(mm) | H2 (mm) | P1/P2 (mm) | δ1(mm) | δ2(mm) | pc | D2 (mm) | Kg | |
500 | 400/550 | 30 | 30 | 18 | ¢180*25 | 670 | ||
600 | 1350 | Optional | 400/550 | 30 | 30 | 20 | ¢180*25 | 742 |
700 | 500/600 | 30 | 30 | 21 | ¢219*25 | 871 | ||
800 | 500/600 | 30 | 30 | 22 | ¢219*25 | 950 | ||
900 | 500/600 | 30 | 30 | 23 | ¢219*25 | 1050 | ||
1000 | 500/600 | 30 | 30 | 24 | ¢219*25 | 1147 | ||
1100 | 500/600 | 30 | 30 | 25 | ¢219*25 | 1267 | ||
1200 | 600/700 | 30 | 30 | 26 | ¢219*25 | 1290 | ||
1300 | 600/700 | 30 | 30 | 28 | ¢219*25 | 1400 | ||
1400 | 600/700 | 30 | 30 | 30 | ¢219*25 | 1530 | ||
1500 | 700/900 | 30 | 30 | 32 | ¢219*25 | 1520 | ||
1600 | 700/900 | 30 | 30 | 33 | ¢219*25 | 1620 | ||
1700 | 700/900 | 30 | 30 | 34 | ¢219*25 | 1730 | ||
1800 | 900 | 30 | 30 | 36 | ¢219*25 | 1787 | ||
1900 | 900 | 30 | 30 | 37 | ¢219*25 | 1863 | ||
2000 | 900 | 30 | 30 | 38 | ¢219*25 | 2000 | ||
2100 | 900 | 30 | 30 | 39 | ¢219*25 | 2127 | ||
2200 | 900 | 30 | 30 | 40 | ¢219*25 | 2259 | ||
2300 | 900 | 30 | 30 | 41 | ¢219*25 | 2400 | ||
2400 | 900 | 30 | 30 | 42 | ¢219*25 | 2590 | ||
2500 | 900 | 30 | 30 | 44 | ¢219*25 | 2700 |
Single-cut, single flight, progressive rock auger | ||||||||
OD | Height | Tool box size | Flight pitch | Flight thickness | Flight thickness | Teeth quantity (excludes pilot) | Weight | Central shaft OD |
D1(mm) | H2 (mm) | P1/P2 (mm) | δ1(mm) | δ2(mm) | pc | Kg | D2 (mm) | |
500 | 500 | 30 | 30 | 10 | 595 | ¢180*25 | ||
600 | 1250 | Optional | 500 | 30 | 30 | 12 | 640 | ¢180*25 |
700 | 500 | 30 | 30 | 13 | 745 | ¢219*25 | ||
800 | 500 | 30 | 30 | 13 | 827 | ¢219*25 | ||
900 | 500 | 30 | 30 | 14 | 904 | ¢219*25 | ||
1000 | 500 | 30 | 30 | 14 | 980 | ¢219*25 | ||
1100 | 500 | 30 | 30 | 15 | 1092 | ¢219*25 | ||
1200 | 700 | 30 | 30 | 15 | 1003 | ¢219*25 | ||
1300 | 700 | 30 | 30 | 15 | 1073 | ¢219*25 | ||
1400 | 700 | 30 | 30 | 16 | 1150 | ¢219*25 | ||
1500 | 700 | 30 | 30 | 16 | 1233 | ¢219*25 | ||
1600 | 700 | 30 | 30 | 18 | 1320 | ¢219*25 | ||
1700 | 700 | 30 | 30 | 19 | 1420 | ¢219*25 | ||
1800 | 900 | 30 | 30 | 20 | 1300 | ¢219*25 | ||
1900 | 900 | 30 | 30 | 21 | 1350 | ¢219*25 | ||
2000 | 900 | 30 | 30 | 21 | 1435 | ¢219*25 | ||
2100 | 900 | 30 | 30 | 22 | 1510 | ¢219*25 | ||
2200 | 900 | 30 | 30 | 22 | 1600 | ¢219*25 | ||
2300 | 900 | 30 | 30 | 23 | 1681 | ¢219*25 | ||
2400 | 900 | 30 | 30 | 23 | 1775 | ¢219*25 | ||
2500 | 900 | 30 | 30 | 24 | 1860 | ¢219*25 |
Design as straight type, better for carry soil ;
Double cutter bearing uniform force, can avoid inclined hole ;
Double spiral easy to carry soil, but meet cohensive soil, single spiral is easy to dump spoil;
Applicable layers: clay, high-weathered layer, gravel etc.
About us
The company's main business: 1. Rotary drilling tools series. 2. Follow up with casing and punching grab series. 3. Rotating drill pipe series. The company adheres to the concept of "quality first, reputation first, customer first", scientific management, standardized operation, continuous improvement, and customer satisfaction.
Contact Person: sale
Tel: +8613363166489